• Производитель
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
    0
  • Наличие
    0
    0
    0
    0
    0
КАТЕГОРИИ

Двигатель

Двигатель
На странице:
Сортировка:
Part Number: 5M8309H-STD Notes: Main Bearings; Race Series; Tri-Metal; Upper & Lower; Flange in Position 5 Manufacturer: ACL  Max Wall at Crown: 0.0789" (2.005mm) Min Std Tunnel Size: 2.5197" (64.000mm) Max Overall Length: 0.748" (19.00mm) w/ 8297H..
$85
This Kit fits the EJ20E, EJ205T, EJ20T, EJ22E, EJ22T, EJ222, EJ22EZ EJ251, EJ252, EJ253, EJ255T & EJ257T, and EJ255D engines that MUST HAVE the 52MM SHAFT SIZE <- NOTE: please verify this before ordering, will NOT fit the smaller 48mm journals.&..
$55
 PRODUCT DESCRIPTION The A'PEXi metal headgaskets provide upgraded protection on high horsepower engines. Factory headgaskets cannot withstand the pressures of high output operation and often cause the engine to "blow." This condition is actually caused by a failure in the factory hea..
$310
 PRODUCT DESCRIPTION The A'PEXi metal headgaskets provide upgraded protection on high horsepower engines. Factory headgaskets cannot withstand the pressures of high output operation and often cause the engine to "blow." This condition is actually caused by a failure in the factory hea..
$310
 PRODUCT DESCRIPTION The A'PEXi metal headgaskets provide upgraded protection on high horsepower engines. Factory headgaskets cannot withstand the pressures of high output operation and often cause the engine to "blow." This condition is actually caused by a failure in the factory hea..
$310
 INSTALLATION METHOD FOR SUBARU MAIN BOLT KITS Part Number: 260-5401 Application: EJ Series 4-Cylinder Note: When changing from factory fasteners to high strength fasteners, clamping force and tolerances will change. Therefore it will be necessary to have the main bore checked f..
$440
 Cap Screw without Washer - Rod Bolt Installation [1] Please check the part-number(s) for your application against the part-number(s) listed on the instruction sheet. [2] Make sure there is an adequate chamfer around the bolt hole on the connecting rod cap to clear the radius un..
$95
Это хорошая причина для покупки, что каждый высококлассный доводчик двигателей полагается на шпильки ARP серии Pro для использования в своих силовых агрегатах. В мире на сегодняшний день нет шпилек лучше. Компания ARP использует в производстве своей продукции сплавы премиуим класса, превосхо..
$220
 INSTALLATION METHOD FOR CUSTOM AGE 625 HEAD STUD KITS Part Number: 260-4704 Application: Subaru 2.0L-2.5L DOHC EJ Series 1. Always verify the part number for your application with the part number on the side of box and the part number on the instruction sheet. This will help ensu..
$560
Part Number: BC5609 Notes: Crankshaft Manufacturer: Brian Crower  Stroke: 79mm Material: 4340 Billet ..
$1 960
Part Number: BC5629 Notes: Crankshaft Manufacturer: Brian Crower  Material: 4340 Billet Stroke: 83mm ..
$1 960
2004 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2005 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2006 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2007 SUBARU IMPREZA WRX STI LIMITED H4 2.5 Engine::Cams 2008 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2009 SUBARU IMPREZA WRX STI H4 2.5 Engi..
$790
2004 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2005 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2006 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2007 SUBARU IMPREZA WRX STI LIMITED H4 2.5 Engine::Cams 2008 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2009 SUBARU IMPREZA WRX STI H4 2.5 Engi..
$790
2004 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2005 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2006 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2007 SUBARU IMPREZA WRX STI LIMITED H4 2.5 Engine::Cams 2008 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2009 SUBARU IMPREZA WRX STI H4 2.5 Engi..
$187
2004 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2005 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2006 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2007 SUBARU IMPREZA WRX STI LIMITED H4 2.5 Engine::Cams 2008 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2009 SUBARU IMPREZA WRX STI H4 2.5 Engi..
$187
2004 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2005 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2006 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2007 SUBARU IMPREZA WRX STI LIMITED H4 2.5 Engine::Cams 2008 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2009 SUBARU IMPREZA WRX STI H4 2.5 Engi..
$187
2004 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2005 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2006 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2007 SUBARU IMPREZA WRX STI LIMITED H4 2.5 Engine::Cams 2008 SUBARU IMPREZA WRX STI H4 2.5 Engine::Cams 2009 SUBARU IMPREZA WRX STI H4 2.5 Engi..
$187
Part Number: BC6609 Notes: Connecting Rods; Sportsman; w/ARP2000 Fasteners; Set of Four Manufacturer: Brian Crower  Rod Length: 5.141" ..
$120
Part Number: BC6608 Notes: Connecting Rods; BC625+ Series; w/ARP Custom Age 625+ Fasteners; Set of Four Manufacturer: Brian Crower  Rod Length: 5.141" ..
$170
Part Number: BC6607-1 Notes: Connecting Rods; I-Beam; w/ARP2000 Fasteners Manufacturer: Brian Crower  Rod Length: 5.141" ..
$170
Part Number: BC6606-1 Notes: Connecting Rods; I-Beam Extreme; w/ARP Custom Age 625+ Fasteners Manufacturer: Brian Crower  Rod Length: 5.141" ..
$200
Part Number: BC6609 Notes: Connecting Rods; Sportsman; w/ARP2000 Fasteners; Set of Four Manufacturer: Brian Crower  Rod Length: 5.141" ..
$450
Part Number: BC6608 Notes: Connecting Rods; BC625+ Series; w/ARP Custom Age 625+ Fasteners; Set of Four Manufacturer: Brian Crower  Rod Length: 5.141" ..
$650
Part Number: BC6607 Notes: Connecting Rods; I-Beam; w/ARP2000 Fasteners; Set of Four Manufacturer: Brian Crower  Rod Length: 5.141" ..
$650
Part Number: BC6606 Notes: Connecting Rods; I-Beam Extreme; w/ARP Custom Age 625+ Fasteners ; Set of Four Manufacturer: Brian Crower  Rod Length: 5.141" ..
$750
Part Number: SB-2LTR-1-A-65137H-04 Notes: PRO-A Connecting Rod; Taper Blade; Set of 4 Manufacturer: Carrillo  Bolt Size: 3/8 WMC Gram Weight: 509 / 369 / 140 Pin Dia: 23mm BE Width: 0.844in / 21.44mm Length: 5.137in / 130.50mm BE Bore:&..
$800
Part Number: SB-2LTR-65137S-04 Notes: PRO-H Connecting Rod; Straight Blade; Set of 4 Manufacturer: Carrillo  BE Bore: 2.1653in / 55.000mm Gram Weight: 524 / 374 / 150 Length: 5.137in / 130.50mm PE Width: 0.845in / 21.46mm BE Width: 0.844i..
$1 150
Part Number: SB-2LTR-65137H-04 Notes: PRO-H Connecting Rod; Straight Blade; Set of 4 Manufacturer: Carrillo  PE Width: 0.845in / 21.46mm BE Width: 0.844in / 21.44mm Bolt Size: 3/8 WMC Length: 5.137in / 130.50mm BE Bore: 2.1653in / 55.000m..
$970
Part Number: SB-2LTR-SA-65137H-04 Notes: PRO-SA Connecting Rod; Taper Blade; Set of 4 Manufacturer: Carrillo  Bolt Size: 3/8 WMC Gram Weight: 517 / 363 / 154 BE Width: 0.844in / 21.44mm Length: 5.137in / 130.50mm PE Width: 0.845in / 21.46..
$840
The Cometic MLS (Multi Layer Steel) gasket is comprised of three layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber base..
$100
The Cometic MLS (Multi Layer Steel) gasket is comprised of three layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber base..
$100
The Cometic MLS (Multi Layer Steel) gasket is comprised of three layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber base..
$100
The Cometic MLS (Multi Layer Steel) gasket is comprised of three layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber base..
$100
The Cometic MLS (Multi Layer Steel) gasket is comprised of three layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber base..
$150
The Cometic MLS (Multi Layer Steel) gasket is comprised of three layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber base..
$150
The Cometic MLS (Multi Layer Steel) gasket is comprised of three layers of stainless steel. Cometic uses stainless steel for increased strength, its ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber base..
$170
Part Number: SC7417 Notes: Individual CP Piston; For Turbo / Supercharger & N2O Applications; No Locks Supplied, use Factory Locks Manufacturer: CP Pistons  Size: +0.5mm Bore: 3.937 (100.00mm) Comp Height: 1.208 Comp Ratio: 10.0:1 ..
$600
Part Number: SC7443 Notes: Individual CP Piston; For Turbo / Supercharger & N2O Applications; No Locks Supplied, use Factory Locks; For Stroker Motor Manufacturer: CP Pistons  Stroke: 83mm Bore: 3.937 (100.00mm) Size: +0.5mm Comp Height: 1.1..
$600
Part Number: SC7421 Notes: Individual CP Piston; For Turbo / Supercharger & N2O Applications; No Locks Supplied, use Factory Locks Manufacturer: CP Pistons  Comp Height: 1.208 Comp Ratio: 8.2:1 Bore: 3.937(100.0mm) Size: +0.5mm ..
$600
Part Number: SC7435 Notes: Individual CP Piston; For Turbo / Supercharger & N2O Applications; No Locks Supplied, use Factory Locks; For Stroker Motor Manufacturer: CP Pistons  Comp Height: 1.123 Comp Ratio: 8.5:1 Stroke: 83mm Bore: 3.937 (10..
$600