ETS

На странице:
Сортировка:
 The ETS GT-R 4.0" Stainless Steel *RACE* Exhaust System is the largest and highest flowing exhaust system on the market. This exhaust has zero restrictions starting with a 4.0" mid pipe which routes into a full 4.0" cat back exhaust system and features a true 4.0" merge collector which..
$2 995

 The 2002-2007 Subaru STI and WRX Exhaust System uses mandrel bent 3.0" stainless steel tubing for a smooth transition through the exhaust with no reductions or neck downs. This ETS exhaust system features a stainless steel vband connection for a leak free seal and gives you the ability..
$895

 The ETS GT-R 4.0" Stainless Steel *RACE* Exhaust System is the largest and highest flowing exhaust system on the market. This exhaust has zero restrictions starting with a 4.0" mid pipe which routes into a full 4.0" cat back exhaust system and features a true 4.0" merge collector which..
$3 620

 The ETS Cat-Back Exhaust System is an effort for all out performance on the EVO. The 3.0", 3.5” or 4.0" Mandrel bent stainless steel piping, and a Vibrant Performance muffler make for a performance and appearance combination that can't be beat. This system starts at the cat and tucks c..
$800

 The ETS Cat-Back Exhaust System is an effort for all out performance on the EVO. The 3.0", 3.5” or 4.0" Mandrel bent stainless steel piping, and a Vibrant Performance muffler make for a performance and appearance combination that can't be beat. This system starts at the cat and tucks c..
$800

 The ETS Mitsubishi Evo X V2 Extreme Exhaust System is a direct replacement of the factory cat back exhaust system. This exhaust was designed for the true enthusiast looking for maximum performance with no mufflers or restrictions in the complete exhaust system. This is one of the loude..
$915

 Features: 3.0", 3.5" or 4.0" Intercooler Core Stainless Steel Piping 4 Ply Silicone Couplers Breeze T-bolt Clamps Brushed Stainless Steel, Gloss Black or Flat Black Coatings. Includes All Mounting Hardware Life Time Warranty Requires removal of your bumper beam&nbs..
$1 460

 Features: 3.0", 3.5" or 4.0" Intercooler Core Stainless Steel Piping 4 Ply Silicone Couplers Breeze T-bolt Clamps Brushed Stainless Steel, Gloss Black or Flat Black Coatings. Includes All Mounting Hardware Life Time Warranty Requires removal of your bumper beam&nbs..
$1 500

 Production of the 2015 WRX intercooler has started! We will be shipping these intercoolers out in 2 weeks (11/17). Features: HUGE 3.5" Thick Front Mount Intercooler Anodized Intercooler Options Available (Red, Blue, Black, etc) Brushed or Wrinkle Black Pipng Optional Blow ..
$1 458

 Features: 3.0", 3.5" or 4.0" Intercooler Core Stainless Steel Piping 4 Ply Silicone Couplers Breeze T-bolt Clamps Brushed Stainless Steel, Gloss Black or Flat Black Coatings. Includes All Mounting Hardware Life Time Warranty Requires Removal of bumper beam *Note: P..
$1 460

 Features: 3.0", 3.5" or 4.0" Intercooler Core Stainless Steel Piping 4 Ply Silicone Couplers Breeze T-bolt Clamps Brushed Stainless Steel, Gloss Black or Flat Black Coatings. Includes All Mounting Hardware Life Time Warranty Requires Removal of bumper beam *Note: P..
$1 570

 The ETS Ralliart intercooler and upper pipe are designed to eliminate the factory restrictions by replacing the small factory intercooler with a larger ETS intercooler and with the ability to support over 1000whp. This intercooler will handle any stock frame or upgraded turbo you can t..
$860

 The ETS Ralliart intercooler and upper pipe are designed to eliminate the factory restrictions by replacing the small factory intercooler with a larger ETS intercooler and with the ability to support over 1000whp. This intercooler will handle any stock frame or upgraded turbo you can t..
$970

 The ETS Ralliart intercooler and upper pipe are designed to eliminate the factory restrictions by replacing the small factory intercooler with a larger ETS intercooler and with the ability to support over 1000whp. This intercooler will handle any stock frame or upgraded turbo you can t..
$1 070

 Features: Pressure Checked at 35psi Bolt on design retains crash beam (3" and 3.5") Fills entire grill with core Eliminates excessive piping Full Mandrel Bent 2.5" Titanium Piping Stainless Steel T-Bolt Clamps 3-Ply Reinforced Silicone Couplers Short Route: Two feet sho..
$1 340

 Features: Pressure Checked at 35psi Bolt on design retains crash beam (3" and 3.5") Fills entire grill with core Eliminates excessive piping Full Mandrel Bent 2.5" Titanium Piping Stainless Steel T-Bolt Clamps 3-Ply Reinforced Silicone Couplers Short Route: Two feet sho..
$1 450

 Features: Pressure Checked at 35psi Bolt on design retains crash beam (3" and 3.5") Fills entire grill with core Eliminates excessive piping Full Mandrel Bent 2.5" Titanium Piping Stainless Steel T-Bolt Clamps 3-Ply Reinforced Silicone Couplers Short Route: Two feet sho..
$1 550

 Features: Pressure Checked at 35psi Bolt on design retains crash beam (3" and 3.5") Fills entire grill with core Eliminates excessive piping Full Mandrel Bent 2.5" Titanium Piping Stainless Steel T-Bolt Clamps 3-Ply Reinforced Silicone Couplers Short Route: Two feet sho..
$1 760

 The obvious tie-in between the UICP and LICP is the ETS EVO X Intercooler. Making certain to hold this unit to the standard of our EVO VIII/IX intercoolers, this unit is a tour de force in efficiency, distribution and flow. The factory inlet and out locations allow for the inlet and ou..
$590

 The obvious tie-in between the UICP and LICP is the ETS EVO X Intercooler. Making certain to hold this unit to the standard of our EVO VIII/IX intercoolers, this unit is a tour de force in efficiency, distribution and flow. The factory inlet and out locations allow for the inlet and ou..
$700

 The obvious tie-in between the UICP and LICP is the ETS EVO X Intercooler. Making certain to hold this unit to the standard of our EVO VIII/IX intercoolers, this unit is a tour de force in efficiency, distribution and flow. The factory inlet and out locations allow for the inlet and ou..
$800

 The obvious tie-in between the UICP and LICP is the ETS EVO X Intercooler. Making certain to hold this unit to the standard of our EVO VIII/IX intercoolers, this unit is a tour de force in efficiency, distribution and flow. The factory inlet and out locations allow for the inlet and ou..
$1 000

 Features: Pressure Checked at 35psi Bolt on design retains crash beam (3" and 3.5") Fills entire grill with core Eliminates excessive piping Full Mandrel Bent 2.5" Piping Stainless Steel T-Bolt Clamps 3-Ply Reinforced Silicone Couplers Short Route: Two feet shorter than..
$1 025

 The obvious tie-in between the UICP and LICP is the ETS EVO X Intercooler. Making certain to hold this unit to the standard of ourEVO VIII/IX intercoolers, this unit is a tour de force in efficiency, distribution and flow. The factory inlet and out locations allow for the inlet and out..
$1 150

 Features: Pressure Checked at 35psi Bolt on design retains crash beam (3" and 3.5") Fills entire grill with core Eliminates excessive piping Full Mandrel Bent 2.5" Piping Stainless Steel T-Bolt Clamps 3-Ply Reinforced Silicone Couplers Short Route: Two feet shorter than..
$1 240

 The obvious tie-in between the UICP and LICP is the ETS EVO X Intercooler. Making certain to hold this unit to the standard of ourEVO VIII/IX intercoolers, this unit is a tour de force in efficiency, distribution and flow. The factory inlet and out locations allow for the inlet and out..
$1 250

 Features: Pressure Checked at 35psi Bolt on design retains crash beam (3" and 3.5") Fills entire grill with core Eliminates excessive piping Full Mandrel Bent 2.5" Piping Stainless Steel T-Bolt Clamps 3-Ply Reinforced Silicone Couplers Short Route: Two feet shorter than..
$1 120

 The obvious tie-in between the UICP and LICP is the ETS EVO X Intercooler. Making certain to hold this unit to the standard of ourEVO VIII/IX intercoolers, this unit is a tour de force in efficiency, distribution and flow. The factory inlet and out locations allow for the inlet and out..
$1 355

 Features: Pressure Checked at 35psi Bolt on design retains crash beam (3" and 3.5") Fills entire grill with core Eliminates excessive piping Full Mandrel Bent 2.5" Piping Stainless Steel T-Bolt Clamps 3-Ply Reinforced Silicone Couplers Short Route: Two feet shorter than..
$1 270

 The obvious tie-in between the UICP and LICP is the ETS EVO X Intercooler. Making certain to hold this unit to the standard of ourEVO VIII/IX intercoolers, this unit is a tour de force in efficiency, distribution and flow. The factory inlet and out locations allow for the inlet and out..
$1 670

 Features: 40 - 60 Horsepower Increase. Fully CNC ported and hand smoothed. Wire EDM performed to ensure maximum reliablity and wall thickness. Flow benched for optimal performance. Includes: ETS 5 Axis CNC Ported Heads Head Modification for high boost applications. S..
$7 500

 The ETS Quiet V2 Exhaust system is a direct replacement of the factory cat back. This exhaust system features a large muffler similar to stock which results in a quiet exhaust system without the added back pressure from the restrictive factory cat back. This is one of the highest flowi..
$1 040

Minor damage to the outlet. This could easily be fixed. This is a 3" thick intercooler with red anodize and the ETS logo. ..
$620

 The ETS Single Exit Exhaust System is a factory replacement for the factory cat back exhaust system. This exhaust system is designed for the true performance enthusiast looking for a light weight exhaust system with a single exit and with piping diameter ranging from 3.0" to 3.5" this ..
$1 040

 If you're looking for the largest exhaust system without sacrificing the weight... look no further, ETS has the largest diameter titanium exhaust system on the market for the Evolution 8 and 9 with a tubing diameter of 3.5". This exhaust system weighs in under 14lbs and features a full..
$1 310

 If you're looking for the largest exhaust system without sacrificing the weight... look no further, ETS has the largest diameter titanium exhaust system on the market for the Evolution 8 and 9 with a tubing diameter of 3.5". This exhaust system weighs in under 14lbs and features a full..
$1 520

 The ETS GT-R 4.0" Titanium *RACE* Exhaust System is the largest and highest flowing exhaust system on the market. This exhaust has zero restrictions starting with a 4.0" mid pipe which routes into a full 4.0" cat back exhaust system and features a true 4.0" merge collector which routes..
$5 140

 The ETS GT-R 4.0" Titanium Exhaust System is the largest and highest flowing exhaust system on the market. This exhaust has zero restrictions starting with a 4.0" Y-Pipe connected to a 4.0" mid pipe which routes into a full 4.0" cat back exhaust system and features a true 4.0" merge co..
$5 770

 The ETS 2008-2013 Subaru STI Front Mount Intercooler is designed to be the highest quality intercooler kit on the market. Our front mount intercooler kit features full titanium piping, 4 ply couplers, Breeze t-bolt clamps and a huge ETS bar and plate intercooler. Features: 3.5" ..
$1 840

 The ETS 2008-2013 Subaru STI Front Mount Intercooler is designed to be the highest quality intercooler kit on the market. Our front mount intercooler kit features full titanium piping, 4 ply couplers, Breeze t-bolt clamps and a huge ETS bar and plate intercooler. Features: 3.5" ..
$1 945

 The ETS 2004-2007 Subaru STI Front Mount Intercooler is designed to be the highest quality intercooler kit on the market. Our front mount intercooler kit features full titanium piping, 4 ply couplers, Breeze t-bolt clamps and a huge ETS bar and plate intercooler. Features: 3.5" ..
$1 840

 The ETS 2004-2007 Subaru STI Front Mount Intercooler is designed to be the highest quality intercooler kit on the market. Our front mount intercooler kit features full titanium piping, 4 ply couplers, Breeze t-bolt clamps and a huge ETS bar and plate intercooler. Features: 3.5" ..
$1 945

 The ETS Single Exit Exhaust System is a factory replacement for the factory cat back exhaust system. This exhaust system is designed for the true performance enthusiast looking for a light weight exhaust system with a single exit and with piping diameter of 3.0" this exhaust will handl..
$1 320

 We have designed a direct bolt on top mount intercooler upgrade for the 2005-2008 Subaru Forester XT. This core is designed specifically for the 2004-2008 Subaru Forester XT, this is not an off the shelf core. The end tanks are cast aluminum and hand ported for maximum flow. Unlike our..
$900

 We have designed a direct bolt on top mount intercooler for the 08+ Subaru STI. This intercooler features a large 21x7x4 core with 39 charge rows! Most competitor intercoolers have between 24-25 charge rows. By having 31 charge rows our intercooler has 62 heat transfers vs our competit..
$720

 We have designed a direct bolt on top mount intercooler upgrade for the 08+ Subaru STI. This core is designed specifically for the 2008+ Subaru STI this is not an off the shelf core. Unlike our competitors intercooler we require no modifications to the a/c line that run behind the inte..
$720

  This is a full turbo back exhaust. This Exhaust Includes: - ETS Downpipe The ETS Evolution X O2 Eliminator Downpipe is a direct replacement for the stock O2 Housing and Downpipe. This downpipe features a recirculated or Atmospheric wastegate dump for people wanting..
$1 802

 This is a full turbo back exhaust. This Exhaust Includes: - ETS Downpipe The ETS Evolution X O2 Eliminator Downpipe is a direct replacement for the stock O2 Housing and Downpipe. This downpipe features a recirculated or Atmospheric wastegate dump for people wanting a stock li..
$1 930

 This is a full turbo back exhaust. This Exhaust Includes: - ETS Downpipe The ETS Evolution X O2 Eliminator Downpipe is a direct replacement for the stock O2 Housing and Downpipe. This downpipe features a recirculated or Atmospheric wastegate dump for people wanting a stock li..
$1 930

 The ETS Turbo Back exhaust for the 2015 WRX is a made right here in our facility. This exhaust features a true 3.0 all the way from turbo outlet flange to the rear section splitting into two 3" pipes and finished off with quad 3.5" SS tips. We use V-band connections on all connections ..
$1 930