Yonaka Motorsports

На странице:
Сортировка:
 Honda Civic 88-91 3DR Hatchback Catback Exhaust (will not fit the 4DR Sedan model) This Yonaka Motorsports catback exhaust system is made of fully polished stainless steel, with 50mm OD mandrel bended piping, and a 4.25" tip. Expect a quiet, clean, deep hum, without that irritat..
$330

 Honda Civic 92-00 2DR/4DR Catback Exhaust (will not fit the 3DR hatch or the 96-00 LX/HX/DX coupe/sedan) This Yonaka Motorsports catback exhaust system is made of fully polished stainless steel, with 2.5" OD mandrel bended piping, and a 4.25" tip. Expect a quiet, clean, deep hum..
$330

Honda Civic 92-00 2DR/4DR Catback Exhaust -will also fit the 97-00 Acura EL -will not fit the 3DR hatch or the 96-00 LX/HX/DX coupe/sedan ***For fitment on 96-00 LX/HX/DX models, all bends are same, but you will need to modify the length of the midpipe*** This Yonaka Motorsports catbac..
$360

Honda Civic 92-95 3DR Hatchback (DX/Si) Catback Exhaust (will not fit the 2DR Coupe or 4DR Sedan model) This Yonaka Motorsports catback exhaust system is made of stainless steel featuring a matte black powder coated finish, with 2.5" OD mandrel bended piping, and a 4.25" tip. Expect a quie..
$360

 Honda Civic 92-95 3DR Hatchback (DX/Si) Catback Exhaust (will not fit the 2DR Coupe or 4DR Sedan model) This Yonaka Motorsports catback exhaust system is made of fully polished stainless steel, with 2.5" OD mandrel bended piping, and a 4.25" tip. Expect a quiet, clean, deep hum,..
$330

94-01 Acura Integra Catback Exhaust Compatibilities: 1994-2001 Acura Integra LS/RS/GS (2DR Coupe Only) 2000-2001 Acura Integra GS-R (2DR Coupe Only) 1998-2001 Acura Integra Type-R This Yonaka Motorsports catback exhaust system is made of stainless steel featuring a matte black pow..
$360

Honda Civic 1996-2000 3DR Hatchback (CX/DX) Catback Exhaust (will not fit the 2DR coupe or 4DR sedan model) This Yonaka Motorsports catback exhaust system is made of stainless steel featuring a matte black powder coated finish, with 2.5" OD mandrel bended piping, and a 4.25" tip. Expect a ..
$360

 Honda Civic 1996-2000 Hatchback (CX/DX) Catback Exhaust (will not fit the 2DR coupe or 4DR sedan model) This Yonaka Motorsports catback exhaust system is made of fully polished stainless steel, with 2.5" OD mandrel bended piping, and a 4.25" tip. Expect a quiet, clean, deep hum,..
$330

 Honda Civic 2006-2011 4DR Catback Exhaust (will not fit the 2DR model, Si model, or Hybrid model) This Yonaka Motorsports catback exhaust system is made of fully polished stainless steel, with 2.5" OD mandrel bended piping, and a 3.5" tip. Expect a quiet, clean, deep hum, withou..
$330

Датчик положения дроссельной заслонки This is a brand new OEM replacement throttle position sensor for Honda and Acura vehicles. This T.P.S. is commonly found in most Honda and Acura vehicles from 1988 to 2001. Weight: 0.5 ..
$45

This is our largest bar and plate front mount intercooler with end tanks. It is the biggest, baddest intercooler ever made. We simply call it "The Monster". With a 4" thick bar and plate core that is over 2 feet long, this intercooler can flow enough cfm to support 1000hp! This intercooler i..
$300

This is a full aluminum bar and plate intercooler with polished cast end tanks. This intercooler is out most popular size for 1G/2G Mitsubishi Eclipses, as well as turbocharged Honda B18C/H22A platforms. Perfect for your DSM, Honda, Nissan or other custom turbo project. Dimensions: - Bar a..
$180

This is a full aluminum intercooler with end tanks. Popular for large boost applications for most turbocharged imports. Dimensions: - End to end length with endtanks: 33" - Core Size: 26" long x 12" high x 3" thick - Inlet/outlet diameters: 3" Performance: - Supports more than 6..
$240

This is a full aluminum intercooler with polished cast end tanks. Dimensions: - Bar and plate design - End to end length: 24.25" - Core Size: 18" long x 9" high x 2.5" thick - Inlet/outlet diameters: 2.5" Performance: - Supports more than 350 hp - Flows up to 500 cfm - Leak test..
$170

This is a full aluminum intercooler with polished cast end tanks. Dimensions: - Bar and plate design - End to end length: 24.25" - Core Size: 18" long x 9" high x 2.5" thick - Inlet/outlet diameters: 2.5" Performance: - Supports more than 350 hp - Flows up to 500 cfm - Leak test..
$170

Complete Engine Rebuild Kit for the H22A engine, found in the 92-96 Honda Prelude.  Parts equivalent to Honda OEM part numbers 06110-P13-010 and 06111-P13-000. This is a brand new complete aftermarket engine rebuild set (head gasket set and bottom end set) for the Honda P..
$130

Yonaka aftermarket engine gasket set for the Honda JDM B16A 1.6L DOHC VTEC engine. Can also be used for the Acura Integra 1.8L GS-R B18C1 and Acura Integra 1.8L Type-R B18C5. NOTE: The intake manifold gasket will not fit the GS-R motor. Set includes: Cylinder head gasket, intake manifol..
$130

Yonaka complete aftermarket engine gasket set for the RB26DETT engine found in the Nissan Skyline. Set includes: FIP gasket, Head gasket, Drain plug washer, Cylinder head gasket (graphite), O Ring seals (10), Crankshaft rear oil seal, Camshaft oil seal (2), Valve intake oil seal (12), Val..
$200

  Yonaka aftermarket engine gasket set for the D15B engine found in the 1988-1995 Honda Civic. The gasket set includes: Cylinder head gasket, intake manifold gasket, exhaust manifold gasket, valve cover gasket, valve c..
$120

Yonaka aftermarket engine gasket set for the SR20DET engine found in the Nissan Silvia (S13 Only) Set includes: FIP gasket, Drain plug washer, Cylinder head gasket (graphite), Crankshaft rear oil seal, Chain tensioner gasket, Valve exhaust oil seal (8), Valve intake oil seal (8), Rocker cove..
$180

  Yonaka complete aftermarket engine gasket set for the D16Y5 engine found in the 1996 to 2000 Honda Civic. Set includes: Cylinder head gasket, intake manifold gasket, exhaust manifold gasket..
$120

The Yonaka mount kit will fit any Honda/Acura B-Series engine into a 1992-1995 Honda Civic, 1993-1997 Honda Del Sol or 1994-2001 Acura Integra. Solid steel construction with solid bushings. Please note that this mount kit will not work with automatic transmissions. It is for manual hydraulic tran..
$100

The Yonaka three (3) piece mount kit will fit any Honda H-Series engine into a 1992 to 1995 Honda Civic, 1993-1997 Del Sol or a 1994 to 2001 Acura Integra. Solid steel construction with solid bushings. Please note that this mount kit will not work with automatic transmissions. It is for manual tr..
$100

The Yonaka three (3) piece mount kit will fit any Honda & Acura B-Series engine, with cable manual transmission, into a 1988 to 1991 Honda Civic or Honda CRX. Solid steel construction with solid bushings. Please note that this mount kit will not work with automatic transmissions. It is for ma..
$100

  The Yonaka mount kit will fit any Honda B or D Series engine into a 1996-2000 Honda Civic. This kit will work with the 2 stud driver's side factory side bracket only. Hydraulic transmission required. Solid steel co..
$100

 Yonaka Motorsports driveshafts are designed for 1994 to 2001 Acura Integra manual transmissions. Application: Perfect for any Honda or Acura B-Series engine swap into a Honda Civic or Acura Integra with hydraulic manual transmission. Honda B16A, B16B Honda Civic Type R, B18B Acu..
$220

 These Yonaka Motorsports driveshafts (driver's side and passenger's side) are designed for use with the H22A motor into the Honda Civic 92-00, Honda Del Sol 93-97, or Acura Integra 94-01. Application: Perfect for any Honda H-Series engine swap into a Honda Civic/Del Sol or Acura..
$230

This is a pair of (2)  axles (driver's side and passenger side) designed for 2002-2006 Acura RSX Base/Premium model with Manual Transmission. These axles are upgraded from the factory and have been tested to be able to withstand 250 bhp. They are designed for the Base/Premium model ON..
$230

 Application: This is a pair (2) of axles left and right side designed for 2002-2006 Acura RSX Type-S with Manual Transmission. These axles are upgraded from the factory and have been tested to be able to withstand 300+whp. They are designed for the Type-S model ONLY and cannot b..
$230

This is a 100% aluminum radiator with aluminum end tanks. This is a bolt-in fit, works with OEM fans. It is designed to replace the OEM radiator of Honda Civics with manual transmissions only. A new radiator cap and plastic drain plug are included.  Dimensions: - Total Size: 15.25" lo..
$150

This is a 100% aluminum dual core lightweight radiator with aluminum end tanks w/ fan shroud kit. It can also accept aftermarket fans. It is designed to replace the OEM radiator for the Acura Integra from 1990-1993. A new radiator cap and drain plug are included. All cores are polished to a ..
$250

This is a 100% aluminum 2" core racing radiator for the 1994-2001 Acura Integra with manual transmission. It comes with an aluminum fan shroud kit and will work with either the stock fan or an aftermarket slim fan. It is a direct replacement and will fit with the original OEM bolts. Perfect ..
$250

This is a 100% aluminum dual core lightweight radiator with aluminum end tanks and fan shroud kit. It can also accept aftermarket fans. It is designed to replace the OEM radiator for the Acura RSX from 2002-2006. A new radiator cap and drain plug are included. All cores are polished to a mirror f..
$250

This is a 100% aluminum dual core lightweight radiator with aluminum end tanks w/ fan shroud kit. It can also accept aftermarket fans. It is designed to replace the OEM radiator for the 92-00 Honda Civic with manual transmissions only. A new radiator cap and plastic drain plug are included. ..
$200

This is a 100% aluminum dual core lightweight radiator with aluminum end tanks and fan/shroud kit. It can also accept aftermarket fans. It is designed to replace the OEM radiator for the Honda CRX from 1988-1991. A new radiator cap and drain plug are included. All cores are polished to a mir..
$250

This is a 100% aluminum dual core lightweight radiator with aluminum end tanks and fan/shroud kit. It can also accept aftermarket fans. It is designed to replace the OEM radiator for the Honda Prelude from 1997-2001. A new radiator cap and drain plug are included. All cores are polished to a..
$250

This is a 100% aluminum dual core lightweight radiator with aluminum end tanks w/ fan shroud kit. It can also accept aftermarket fans. It is designed to replace the OEM radiator for the Honda S2000 from 2000-2005. A new radiator cap and drain plug are included. All cores are polished to a mirror ..
$250

This is a 100% aluminum dual core lightweight radiator with aluminum end tanks and fan shroud kit. It can also accept aftermarket fans. It is designed to replace the OEM radiator for the Lexus IS300 from 2001-2005 (manual trans). A new radiator cap and drain plug are included. All cores are ..
$250

This is a 100% aluminum dual core lightweight radiator with aluminum end tanks w/ fan shroud kit. It can also accept aftermarket fans. It is designed to replace the OEM radiator for the Nissan 240SX with the SR20 engine swap.  A new radiator cap and drain plug are included.  All co..
$250

This is a 100% aluminum dual core lightweight radiator with aluminum end tanks and fan shroud kit. It can also accept aftermarket fans. It is designed to replace the OEM radiator for the Nissan 350Z from 2003-2006 (manual trans). A new radiator cap and drain plug are included. All cores are ..
$300

This is a 100% aluminum dual core lightweight radiator with aluminum end tanks w/ fan shroud kit. It can also accept aftermarket fans. It is designed to replace the OEM radiator for the Subaru WRX and STI from 2002-2007. A new radiator cap and drain plug are included. All cores are polished ..
$300

This is a 100% aluminum dual core lightweight radiator with aluminum end tanks w/ fan shroud kit. It can also accept aftermarket fans. It is designed to replace the OEM radiator for the Subaru WRX and STI from 2008-2014. A new radiator cap and drain plug are included. All cores are poli..
$300

This is a 100% aluminum dual core lightweight radiator with aluminum end tanks and fan/shroud kit. It can also accept aftermarket fans. It is designed to replace the OEM radiator for the Toyota Supra from 1993-1998.  A new radiator cap and drain plug are included.  All cores are po..
$300